1.   Most washerless faucet handles are held in place with a set screw that can be turned with an allen wrench of the right size.

2.   Most bolts fall into the categories of machine bolts, stove bolts, carriage bolts, machine screws, set screws, specialty bolts and threaded rods.

3.   Remove the base cap by loosening the small set screw that holds it to the lamp.

4.   Some handles are held in place with a set screw near the base of the handle.

5.   The adjustment is made by loosening the set screw that holds the clevis and lift rod.

6.   The anchor plates are bolted to the wall and the escutcheons are fastened to them with hidden set screws.

7.   The canopy is held in place with two set screws.

8.   The set screw holding the handle in place will be underneath.

9.   The two pieces are held together with a set screw.

10.   Use an Allen wrench to loosen the set screw.