| wood screw | 1.25 | Four wood screws usually hold the mechanism in place. | ||
| loose screw | 0.99 | Tighten loose screws with a screwdriver. | ||
| metal screw | 0.99 | Metal screws or wire are often used to reattach the bones. | ||
| terminal screw | 0.72 | Most dimmers do not have terminal screws. | ||
| mounting screw | 0.66 | If it is loose, try to tighten the mounting screws. | ||
| new screw | 0.66 | Allow the glue to dry before driving in a new screw. | ||
| set screw | 0.66 | Use an Allen wrench to loosen the set screw. | ||
| small screw | 0.59 | Stair gauges are small screw clamps. | ||
| sheet-metal screw | 0.53 | Buy a bigger sheet-metal screw at a hardware store. | ||
| tiny screw | 0.39 | Tighten the tiny screw on the side of the socket. | ||
| old screw | 0.33 | The old screws, hooks and nuts are the coin of my realm. | ||
| driving screw | 0.26 | Mount the new front to this face by driving screws from inside the drawer. | ||
| economic screw | 0.26 | The move just tightened the economic screw on the Strip. | ||
| gigantic screw | 0.26 | Look at this gigantic screw! | ||
| long screw | 0.26 | Two long screws into a solid stud, though, should be enough. |