1.   Sand the surface to roughen it before repainting.

2.   Sand the surface softly and carefully.

3.   Apply a second coat, then sand the surface.

4.   As with any paint, you should clean and sand the surface with a fine grit abrasive paper to remove all gloss.

5.   - Scrape all loose paint and sand those surfaces.

6.   File and sand the surfaces so they are flat and square without any peaks or valleys.

7.   Is there any remedy other than sanding the surface and refinishing the table?

8.   It is usually necessary to sand the surface after applying them.

9.   Nevertheless, avoid contact with paint residue as much as possible, and do not sand surfaces to strip them.

10.   Sand the surface thoroughly and apply two coats of solid stain.