1.   A few small nails or screws driven into a large maple tree will not hurt it.

2.   A lightweight tack hammer is designed for driving small nails and brads.

3.   Coat the beveled ends with a little glue before assembling and secure the joint with one or two small finishing nails or brads.

4.   Drive two small nails into the board, one at each end of the line.

5.   It also produces dry skin, wrinkled skin, sparse dry hair, small brittle nails and cone-shaped teeth.

6.   Look for one in the same height and width of the box, and use small nails to hold it in place.

7.   Parts came apart with a tap of a hammer, although small nails holding the glued joints had to coaxed out first.

8.   Removing the tack strips will leave small nail holes in the floor.

9.   Sometimes a small nail gently pushed up through the already leaking gap will mark the spot.

10.   The ferrule is secured to the handle with small nails or rivets.