1.   One painter says to use latex finish paint.

2.   Apply a coat of latex enamel undercoater, and finish with two coats of an eggshell finish latex wall paint.

3.   Apply an oil-based primer, and finish with any kind of oil-based finish paint.

4.   Apply one coat of a latex enamel undercoater and finish with one or two coats of an eggshell or flat finish latex wall paint.

5.   A. Cleaning may reduce the stains, but I think there should be some kind of stain killer applied before the finish paint is put on.

6.   A. Prime the pressboard shelves on all surfaces with an oil-based interior primer, and finish with a latex enamel or latex eggshell finish paint.

7.   But to get to the question, apply two thin coats of an eggshell finish latex wall paint.

8.   Do not use a semigloss or eggshell finish paint because the plaster is rough and often uneven, and these blemishes will show up more with such a finish.

9.   I used two coats of Kilz and finish paint, then a coat of exterior latex primer, and a coat of Kilz, and it is still bleeding.