31.   On carved or grooved surfaces use a wire brush with brass bristle or a stiff scrub brush.

32.   Parts of the painting have been scraped bare with a wire brush and others flattened with a hot iron.

33.   Pull off the debris and clean up the stopper with a wire brush.

34.   Remove the cardboard and the dowels, and add texture with a wire brush.

35.   Remove built up grease with wire brush.

36.   Put some more stripper down and work on the same area with a wire brush.

37.   Remove loose and flaking particles with a wire brush.

38.   Rusted furniture must be scraped with a wire brush to remove the rust before painting.

39.   Remove caked grass and dirt with a stiff putty knife and a wire brush, then check to make sure that the engine mounts are tight.

40.   Remove rust and dirt from the pivot hole with a small wire brush or fine emery cloth rolled into a cylinder.