1.   Unpleasant and smelly as the operation was, she felt a surge of exultation when she cut the thread of the last suture and surveyed her unconscious patient.

2.   Cutting external threads on a rod is done with a die.

3.   Cutting threads in a hole is relatively easy and straight forward.

4.   His mother, Blanche Rangel, cleaned houses, worked as a home attendant and cut the threads off shoulder pads coming off a factory assembly line.

5.   Hold the tap wrench vertically as you cut the threads and back it out frequently to remove plastic chips.

6.   Once the hole is drilled, you can cut the threads.

7.   Once the threads are cut, you can drive the screw into the hole.

8.   Taps cut internal threads in a hole.

9.   These are special hardened screws that cut threads into the masonry.

10.   To customize the cranks, Atherton trims a conventional model, cuts new threads and re-mills the metal to fit the pedals.