1.   A jammed hinge or latch can be freed with a penetrating oil such as Plus Gas.

2.   A. Your best bet is to sand that stain to the bare wood, then apply a penetrating oil stain to match the paneling.

3.   I heated the glass, and used some penetrating oil.

4.   If the stain did not lift entirely, staining the entire floor with a penetrating oil stain before was the only cure short of replacing the floor.

5.   If you want the wood a little darker, use a penetrating oil stain before varnishing.

6.   If there are a few bare spots in your piece, touch them up with a penetrating oil stain to match.

7.   In that case, apply a little penetrating oil and tap the joint lightly with a hammer.

8.   Instead, use an interior penetrating oil stain.

9.   Minwax is one of the better stains, especially the penetrating oil stains.

10.   Penetrating oil seals come in clear or slightly tinted forms that give the deck a cedar, redwood, driftwood or oak look.