71. So, you could give them two coats of semi-gloss oil-based polyurethane varnish. 72. So, to find out, paint a small, obscure area with water-based polyurethane varnish. 73. Still another trick is to defy the specialists and strip the wax and apply two coats of an oil-based polyurethane varnish. 74. Step Three uses the Diamond Wood Finish, a water-based polyurethane varnish strengthened by the addition of a catalyst just before using. 75. Some specialists recommend using a water-based polyurethane varnish. 76. The boards will be sanded, and then three coats of polyurethane varnish will be applied. 77. The boards, slightly pickled and finished with five coats of water-based polyurethane varnish, not only look good but wear like iron. 78. The doors were stained and coated with polyurethane varnish on both sides, but within a short while they began to warp badly. 79. The finish is water-based polyurethane varnish. 80. The label on the can said water-based polyurethane varnish goes on milky or cloudy, but soon clears. |