1.   After the nut is removed the entire stem can be unscrewed and lifted out.

2.   Remove the nut with the adjustable wrench.

3.   Remove the nuts, cool slightly and wrap them in a kitchen towel.

4.   Remove the nut holding the blade in place and slip the blade off the shaft.

5.   Remove the nut at the J pipe in the same way you removed the nut at the tailpiece.

6.   Remove nuts from pan and peel as soon as they are cool to the touch.

7.   The only way to remove the nut is by splitting it with a flat chisel.

8.   To test for doneness, remove a nut from oven and cool quickly in refrigerator or freezer.

9.   Use a wrench to remove the nut on the pivot bolt, then pull the handles apart.

10.   Using a slotted spoon, remove the nuts and spread on wax paper.