1.   Yeah, when you put the first coat on it.

2.   Apply a first coat of a primer and sealer such as Kilz or BIN to seal in the odor before applying your finish coat.

3.   Apply a first coat of a shellac-based sealer and primer such as BIN to insure a good bond, then paint with two coats of semi-gloss enamel.

4.   Apply a first coat of enamel undercoat or a shellac-based primer, then finish with two coats of exterior enamel, sanding lightly between coats.

5.   After this dries, sand smooth with fine paper before the first coat of varnish is applied.

6.   He went to Tyee High School, where the first coats of paint had dried only a couple of years before he enrolled.

7.   I once stayed long enough to buy my first winter coat with my own money.

8.   If possible, the first coat of finish should be applied on the same day the sanding was completed.

9.   If you are going to repaint, apply a first coat of a stain-killing sealer such as Kilz, BIN or similar product.

10.   In this way, the first coat will still be soft enough to allow a good bond with the next layer.