21.   So, you will probably first have to strip off all the finish down to the bare wood by either sanding or by using a chemical paint remover.

22.   So, sand off the paint or remove it with chemical paint remover.

23.   That leaves chemical paint remover, a miserable, messy job, compounded by the fact that you will be working overhead.

24.   The only solution I can suggest now is to remove all of the old paint, either by sanding and scraping or with a chemical paint remover.

25.   The walls must be sanded to bare wood or the finish removed with chemical paint remover, then sanded.

26.   Therefore, I think the cure is to remove all paint to the plaster, using chemical paint remover, and start all over again, using thin coats.

27.   Use chemical paint remover, and dig it out if necessary.

28.   You have to use chemical paint remover for those areas.

29.   You have to remove all the paint by scraping and a chemical paint remover before applying the epoxy.

30.   Your only sure cure now is to remove all of the paint down to the bare surface, using a chemical paint remover.